Others

How to add, edit, and deactivate/activate Others? 

Certificate Type

• Click File Menu >> Master Data >> Others
• It will show Certificate Type tab by default

• Click on +New... to add a new Certificate Type
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit Certificate Type, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes

• By Clicking Activate or Deactivate a Certificate Type by clicking on it which is highlighted in blue to click Activate/Deactivate.
  • To activate it, select on the Description name
  • Click on  button, it will prompt you a Activate Default Value message box
  • Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from  to , it means it has been activated.

 

• To deactivate it, select on the Description
• Click on  button, it will prompt you a Deactivate Default Value message box
• Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from  to   , it means it has been deactivated.

 

• To exit from Default Values message box, Click on  button or  button at the top right hand corner.

 

Claim Party

• Click File Menu >> Master Data >> Others
• Select Claim Party from the drop-down menu

• Click on +New... to add a new Claim Party.
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit Claim Party, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes

• By Clicking Activate or Deactivate a Claim Party by clicking on it which is highlighted in blue to click Activate/Deactivate.
  • To activate it, select on the Description name
  • Click on  button, it will prompt you a Activate Default Value message box
  • Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from to , it means it has been activated.

 

• To deactivate it, select on the Description
• Click on  button, it will prompt you a Deactivate Default Value message box
• Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from  to , it means it has been deactivated.

 

• To exit from Default Values message box, Click on  button or  button at the top right hand corner.

 

Clinical Data Type

• Click File Menu >> Master Data >> Others
• Select on Clinical Data Type by the drop-down menu

• Click on +New... to add a new Clinical Data Type.
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit Clinical Data Type, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes

• By Clicking Activate or Deactivate a Clinical Data Type by clicking on it which is highlighted in blue to click Activate/Deactivate.
  • To activate it, select on the Description name
  • Click on  button, it will prompt you a Activate Default Value message box
  • Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from to , it means it has been activated.

 

• To deactivate it, select on the Description
• Click on  button, it will prompt you a Deactivate Default Value message box
• Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from  to , it means it has been deactivated.

 

• To exit from Default Values message box, Click on button or  button at the top right hand corner.

 

Dialect
*Dialects listed here will be reflected under Patient Information Module*

• Click File Menu >> Master Data >> Others
• Select Dialect from the drop-down menu

 

• Click on +New... to add a new Dialect.
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit Dialect, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes

• By Clicking Activate or Deactivate a Dialect by clicking on it which is highlighted in blue to click Activate/Deactivate.
  • To activate it, select on the Description name
  • Click on  button, it will prompt you a Activate Default Value message box
  • Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from to , it means it has been activated.

 

• To deactivate it, select on the Description
• Click on  button, it will prompt you a Deactivate Default Value message box
• Click OK to save changes and Cancel to unsaved changes.

 

• The Status column icon will show from  to , it means it has been deactivated.

 

• To exit from Default Values message box, Click on  button or  button at the top right hand corner.

 

In Patient Type

• Click File Menu >> Master Data >> Others
• Select In Patient Type from the drop-down menu

 

• Click on +New... to add a new In Patient Type.
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit In Patient Type, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes

• By Clicking Activate or Deactivate an In Patient Type by clicking on it which is highlighted in blue to click Activate/Deactivate.
  • To activate it, select on the Description name
  • Click on  button, it will prompt you a Activate Default Value message box
  • Click OK to save changes and Cancel to unsaved changes. 
    

• The Status column icon will show from to , it means it has been activated.

 

• To deactivate it, select on the Description
• Click on  button, it will prompt you a Deactivate Default Value message box
• Click OK to save changes and Cancel to unsaved changes.

• The Status column icon will show from  to , it means it has been deactivated.

 

• To exit from Default Values message box, Click on  button or  button at the top right hand corner.

Language
*Language listed here will be reflected under Patient Information Module*

• Click File Menu >> Master Data >> Others
• Select Language from the drop-down menu

 

• Click on +New... to add a new Language.
• Key in the information in Default Value editor (Default Value).
• Click OK to save or Click Cancel to cancel saving

• If you want to Edit Language, do the following:
  • Select the Description to edit
  • Click Edit button
  • Click OK to save changes, or Cancel button to cancel changes